The NSB-25 accepts 2.5-inch SATA hard drive(or SSD) used for laptop computer. The thickness of hard drive should be less than 9.5mm. Internal drive capacity is limited to 32TB, but the current maximum available hard drive is 2TB (as of Dec 2016). If your hard drive is less than 7mm thick, you can use ‘Spacer’.
Recommended Internal Drive
Compatibility with Samsung 850 EVO/PRO:Upgrade to firmware V1.05.2 or later to support 850 EVO/PRO of SSD.
Compatibility with Samsung labeled Seagate hard drive:Upgrade to firmware V1.21 or later to support Samsung labeled Seagate hard drive. If your computer is base on USB 2.0, avoid using the Seagate hard drive on the early Bridge Pellet. Because the early Bridge Pellet with Seagate hard drive may not detected at the computer with USB 2.0 port.
An external USB hard drive can be connected to the NSB-25 via the ‘USB Host’ slot of the NSB-25. This allows users to make secondary copies to external USB drives without using a computer for additional data safety. External hard drives must be formatted using exFAT file system.